Atrea Duplex EC5/ECV5 280/380 filter set 10 pcs. G4 (original)
Atrea Duplex EC5/ECV5 280/380 filter set 10 pcs. G4 (original)
Filter protection level indicates efficiency in blocking particles or contaminants, varying by standard and application.
General dust and particle filtration
Filter protection level indicates efficiency in blocking particles or contaminants, varying by standard and application.
Certified quality to international ISO standards
Manufactured entirely within the European Union
Effective filtration for up to 6 months.
Price for set
Model compatibility
Compatible with the following models:
- Atrea Duplex 280 EC5
- Atrea Duplex 280 ECV5
- Atrea Duplex 280 ECV5 RD5
- Atrea Duplex 280 ECV5 RD5 CF
- Atrea Duplex 280 ECV5 CP
- Atrea Duplex 380 EC5
- Atrea Duplex 380 ECV5
- Atrea Duplex 380 ECV5 RD5
- Atrea Duplex 380 ECV5 RD5 CF
- Atrea Duplex 380 ECV5 CP
What filter set protects against
Filter pack includes 10 filters that can be used as:
- Extract filter – G4 (Coarse 75%) – for MVHR protection
- Supply filter – G4 (Coarse 75%) – for indoor air protection
This filter pack follows the ISO 16890 standard for particle filtration efficiency.
The G4 filters capture up to 75% of coarse airborne particles that are larger than 10 microns, such as soil particles, large pollen grains, plant debris, insect wings, sawdust, sand and textile lint. The filter used on the extract side cleans the air removed from your indoor space and protects the MVHR unit by reducing visible dust and general build-up in the ventilation system. Meanwhile, the filter used on the supply side helps clean incoming outdoor air before it enters your premises, improving indoor air quality and protecting your health.
While the pack contains 10 filters, only 2 are used at a time – one for the extract side and one for the supply side of your MVHR system. You can use the same filter type for both. However, if you prefer a higher filter class for the supply side, we recommend purchasing an additional 10-pack of F7 filters, as they are sold separately. You can find them via this link.
Usage and maintenance
Atrea recommends replacing the filters every 3 months, to ensure optimal air quality and system performance.
However, replacement frequency may vary depending on factors such as:
- Air pollution levels (e.g. urban vs rural areas)
- Allergies or respiratory sensitivities
- Indoor pets or smoking
- Dust from nearby construction sites
If your system includes a filter change indicator, follow its alerts. Otherwise, check the filters visually – if they appear very dirty or clogged, it's time to replace them.
Manufacturing quality
These filters are manufactured by Atrea, a respected family‑owned company based in the Czech Republic. Alongside its main facility, Atrea coordinates production through branches and authorised partners across Europe, where they maintain strict oversight of product quality. Backed by over 30 years of engineering experience, Atrea designs its products with a focus on energy efficiency, incorporating advanced heat exchange systems, automatic climate control, and cutting-edge airflow technology. All products undergo thorough internal testing and meet stringent European performance and quality standards.
These material filters are made from high-quality synthetic non-woven media, designed to provide reliable particle filtration with minimal airflow resistance. This type of filter is lightweight, flexible, and easy to handle during replacement.
Choosing original Atrea filters guarantees your MVHR system performs according to the manufacturer’s specifications, maintaining optimal air quality and energy efficiency.
Original product codes
- A160981
| Filter Type / EN 779 Class | ISO 16890 Class | Efficiency (%): Coarse (>10 µm) | PM10 (≤10 µm) | PM2.5 (≤2.5 µm) | PM1 (≤1 µm) | Gas/VOC Removal | Real-Life Particle & Pollutant Examples |
|---|---|---|---|---|---|---|---|
| G1 | ISO Coarse | ~40% | <10% | ~0% | ~0% | Sand, textile fibers, carpet fluff, plant debris, insect wings, visible lint | |
| G2 | ISO Coarse | ~50% | <15% | ~0% | ~0% | Sawdust, hair, coarse textile particles, large flakes of paint or rust | |
| G3 | ISO Coarse | ~60% | <25% | ~5% | ~0% | Coarse dust, lint, animal hair, some pollen | |
| G4 | ISO Coarse | 65-75% | 25-35% | 10-15% | <5% | Large pollen grains, soil particles, textile lint | |
| M5 | ISO ePM10 ≥50% | ~80% | 50–65% | 20–30% | 10–15% | Pollen, mold spores, pet dander, house dust | |
| M6 | ISO ePM10 (60–80%) | ~90% | 65–80% | 30–45% | 15–25% | Building/construction dust, concrete dust, ash particles, fine cement dust | |
| F7 | ISO ePM2.5 (50–65%) | >90% | 75–90% | 50–65% | 30–45% | Bacteria, smog, tobacco smoke particles, combustion dust, spores, wildfire smoke particles | |
| F8 | ISO ePM2.5 (65–80%) | >95% | 85–95% | 65–80% | 45–60% | Fungal spores, air pollution aerosols | |
| F9 | ISO ePM1 (80–95%) | >95% | >95% | >90% | 80-95% | Diesel soot, airborne viruses, smoke from traffic and industry, combustion particles, ultra-fine dust, secondary organic aerosols from chemical reactions in air | |
| Activated Carbon | Not classified (gas filter) | Varies (combined with prefilter) | Varies | Varies | Varies |
High Efficiency |
Volatile Organic Compounds (VOCs), formaldehyde, ozone, nitrogen dioxide (NO₂), sulfur dioxide (SO₂), benzene, toluene, cooking odors, cigarette smoke odors, pet smells, perfumes |
Instructions for changing the filters are provided in the manual below:
Order Processing Time
All in-stock products are dispatched within 1–2 business days, except for clearly marked items with an extended dispatch time (5–10 business days).
Shipping Costs
Shipping is free for all orders over €59. For orders up to €59, shipping costs will be calculated at checkout.
Order Tracking
Once your order has been dispatched, we will send you a confirmation email with tracking details so you can easily follow its journey to you.
Business Days
Delivery times are calculated in business days – from Monday to Friday, excluding public holidays.
Easy returns within 30 days
You may return any product within 30 days of receiving it for a full refund – no questions asked!
If you need to return items after 30 days, please contact us. We review these requests on a case-by-case basis and will do our best to help.
Condition of returned products
We accept returns of products unused in intact condition, including those unpacked but not damaged. Products that are damaged, dirty, or otherwise unusable cannot be accepted for return.
Defective or incorrect items
If you receive a defective or incorrect product, please contact us immediately. We will ensure the issue is resolved promptly, as your satisfaction is our top priority.
How to return an item?
Please contact us before sending back any products. We will provide you with the return shipping details and assist you throughout the process. We cover all costs of return shipping.
Refund processing timeline
Once your returned product is delivered to us, we will verify its condition within 5 working days. Refunds will be processed within an additional 5 working days after approval, using the original payment method.
Is it possible to cancel my order?
Yes, cancellations are possible before your order has been shipped.
Need Help? Start Here.
We’ve gathered answers to the most common questions about our products and services. If you can’t find an answer here, please contact us directly.
Filter class refers to the size and quantity of airborne particles a filter can capture. In general, the higher the classification, the more effectively the filter removes fine particles such as pollen, dust, and other pollutants from the air.
For incoming outdoor air, it’s generally recommended to use higher-class filters. However, we always suggest following the manufacturer’s guidance and using the specific filter sets outlined in your unit’s eco-commissioning documentation.
For more information, take a look at our comprehensive guide to filter classes for heat recovery units.
We recommend replacing the filters every 3-6 months, to ensure optimal air quality and system performance.
However, replacement frequency may vary depending on factors such as:
- Air pollution levels (e.g. urban vs rural areas);
- Allergies or respiratory sensitivities;
- Indoor pets or smoking;
- Dust from nearby construction sites.
If your system includes a filter change indicator, follow its alerts. Otherwise, check the filters visually – if they appear very dirty or clogged, it's time to replace them.
Replacing filters is generally a simple, do-it-yourself task with no special tools required. Most of our filters come with detailed manuals or video instructions, available in the “How to change” tab on each product page. Simply find your filter and check that section for step-by-step guidance.
To find the correct filter for your MVHR unit, you first need to identify the brand and model of your system. You can usually find this information on a label attached to the unit itself. Alternatively, consult the technical data in the maintenance manual.
If you’re unsure about the brand or model, there’s another way to find the right filter: remove the existing filter and measure its length, width, and height. Then, search by size in our online shop. Our filter listings include detailed specifications to help you match the right one.
If you're still not sure, feel free to contact us - send us the filter’s measurements, photos, or any other details, and we’ll be happy to help you find the right match.
MVHR stands for Mechanical Ventilation with Heat Recovery. It's a ventilation system that continuously extracts polluted, stale, or humid air and supplies fresh, filtered air into the premises. As the air flows through the system, a heat exchanger transfers warmth from the outgoing air to the incoming air - without mixing the two. This helps maintain indoor air quality while reducing heating costs and energy waste.
In between filter replacements, it’s also a good idea to clean the inside of your unit. This helps maintain not only your health but also the performance and lifespan of your heat recovery system.
You can do this yourself by removing the filters and unscrewing the front cover. This gives you access to the heat exchanger, which can be cleaned with a vacuum or a soft cloth.
No, MVHR filters are not designed to be washed. Washing can damage the filter material, reduce its efficiency, and affect the shape, which may lead to poor fit and airflow issues. If you're looking to remove light surface dust, it's better to gently wipe the filter with a soft, dry cloth. For optimal performance, we still recommend replacing the filters regularly.
Clean filters are essential for both your health and the performance of your ventilation system. Over time, dust, bacteria, and fungi can accumulate in the filters, the system, and the air ducts. If the filters become saturated, your MVHR unit has to work harder to maintain airflow - using more energy and increasing your costs.
Dirty filters can also reduce indoor air quality by allowing harmful particles and microorganisms to recirculate, which may negatively affect your health and well-being.
Several factors can cause your MVHR filter to become contaminated faster than expected, including both environmental conditions and the type of filter used:
- Outdoor air quality: if you live near busy roads, industrial zones, or construction sites, your system may pull in higher levels of dust and pollution. In these cases, filters can become saturated in less than two months.
- Filter efficiency: higher-grade filters (such as F7 or ePM1-rated) capture finer particles, which improves air quality - but they may clog more quickly due to the higher amount of trapped pollutants.
- Filter quality: low-cost or poorly made filters (especially those from non-EU sources) may have higher pressure drops, reducing airflow efficiency and requiring more frequent replacement. They can also increase energy consumption over time.
- System airflow rate: running the MVHR system at more powerful airflow settings means a greater volume of air moves through the filters each hour, which can lead to faster filter contamination.
If you notice filters getting dirty unusually fast, it may be worth reviewing your filter class, local air conditions, or even upgrading to a multi-stage filtration setup.
MVHR systems typically use two filters, some models may even include three or four - depending on the design and filtration requirements.
Usually one filter is used for extract air and one for supply air, each serving a different purpose:
- The extract filter captures dust and particles from the indoor air as it’s removed from your home. This helps protect the internal components of the MVHR unit and reduces buildup in the ventilation system.
- The supply filter cleans the outdoor air before it’s brought into your premises. This improves indoor air quality and protects your health.
Using both filters ensures that your MVHR system remains efficient while maintaining a clean and healthy indoor environment.
Yes. Using higher-grade filters (such as F7 or ePM1-rated filters) can significantly reduce allergens like pollen, dust mites, and pet dander, improving indoor air quality for allergy sufferers. Regular replacement is key to maintaining this benefit.
EN 779 and ISO 16890 are two different standards for classifying air filters. While they serve the same purpose, describing how efficiently a filter removes particles from the air, they use different testing methods and naming systems.
EN 779 (now outdated) used categories like G4, M5, F7, etc. ISO 16890, which replaced it, classifies filters based on their efficiency against specific particle sizes (PM10, PM2.5, PM1). For example, a filter that used to be called F7 under EN 779 may now be labeled as ePM1 60% under ISO 16890.
We include both classifications on our product pages to help you find the right match for your system.
Original filters are made by or for the ventilation unit’s original brand, through certified production partners. They follow the brand’s specific manufacturing and packaging standards.
House brand filters, on the other hand, are made by trusted independent manufacturers who meet strict quality requirements. We work closely with our production partners and carry out our own quality control to ensure a precise fit and reliable performance. Since they’re not tied to a specific brand label, house brand filters are often more affordable - offering excellent value without compromising on quality.
Yes. Most of our filters are fully compatible with modern ventilation systems, including smart and automated units. However, we always recommend checking your system’s specifications or sending us your model details to ensure a perfect fit.
Still Have Questions?
Support details to capture customers that might be on the fence.
Contact Us Now
Average rating
0.0
Only logged in customers who have purchased this product may leave a review
Customer Feedback
There are no reviews yet.